HSR-650 paper straw flexo printing machine

一、Basic configuration
1、Unwinding unit 1 set
1.Maximum unwinding diameter 830mm
2.3 inch air shaft can be replaced with 6 inch air shaft
3.Rewinding, unwinding tension control system, magnetic powder brake 1pc,automatic motor rewinding
4.Equipped with a fast inflatable gun
2、Automatic correction system 1 set
1.one set of paper combination table
2.Paper guide roller with high hardness anodizing
3.Ball screw electric actuator
4.Correction and transmission sensor is used to correct the deviation and transmit the sensor
5.The electronic paper web guide traction device can continuously and accurately correct the system when there is a slight offset during the movement of the paper web.
6.Closed loop control system
7.Detection method: edge detection
8.Correction accuracy: ±0.12mm
3、1 set of adjustable paper feeding system (double pressure roller)
1.Double pressure roller
2.Realize stepless adjustment of printing paper tension
4、Printing color 4 unit
1.The printing unit use a 45 degree DP13 helical gear structure.
2.Reserved image inspection station
3.Anolix roller, plate roller pneumatic clutch pressure
4.Ceramic anolix roller 4, (customer request)
5.Plate cylinder 8pcs (customer requirements)
6.Manual horizontal focus register 4 sets
7.Manual vertical focus register 4 sets
8.Single knife reverse squeegee system 4 sets
9.4 sets of stainless steel ink cartridges,
10.Quick change of plate cylinder without any tools
11.Anolix roller rotation function: The anolix roller will automatically run every time when the stops, preventing the ink from drying on the surface of the anolix roller, causing the network to block.
4 stick gear: cp1/8
5、1 set of drying system
Printing unit infrared heating drying, infrared tube 4 sets
6、1 set of paper output system
Double pressure roller
7、1 set of rewinding station
1.one set is used for rewinding after printing, with a 3-inch inflatable shaft,which can be replaced with a 6 inch air shaft.
2.Max rewinding diameter:800mm
8、1 set plate loader
1.Ordinary plate machine for plate loading to achieve multi-color overprinting
2.Can be used for quick replacement between products and products
9.1 Set tools

Technical parameter ：

Electrical configuration list：

 Free spare part list：